Our Inspection Services

Our inspections are done by an NRVIA certified inspector who, more than anything, wants you to know exactly what you’re getting when you purchase an RV.

Important Reasons to Get an RV Inspection!!!

Pre-Purchase Inspection

There are many reasons to get your RV inspected. The most significant is the pre-purchase inspection. This allows you, the consumer, to know what you are getting from the dealership or private seller. Sometimes the seller may be unaware of the issues or damage their RV has. At other times, damages that don’t seem significant right away can turn into an issue with alarming speed. Being aware of potential problems your RV purchase has gives you more control over the price and the quality of the RV you invest in. You don’t get very much time at the dealership or with the seller to go over your rig, but I will check every outlet, every drawer, every appliance and make sure everything is held to the highest standard.

Seller Inspection
As a seller, you want to be aware of potential problems with the RV you’re trying to sell so as to mitigate issues when a buyer is involved. If you’re aware of any problems, you can make fixes or adjust your price accordingly, assuring a fair purchase for your customer that won’t lead to a lawsuit down the road when something goes wrong that should have been addressed.

End of Warranty Inspection
Once your RV is yours, there are still other reasons that an inspection can be beneficial. Having an inspection done before your already paid for warranties run out can help you get any problems addressed while still within the covered warranty period.

We are here to address all your inspection needs, whatever they may be.

Essential Level Inspection

Our essential level inspection was created to be a more cost-effective version of the premium inspection. The inspector will look at 350 different points on the RV and afterward create a report that includes their findings on these 350 points as well as 25 - 30 pictures supporting their findings.

The essential level inspection includes a basic functionality (does it operate as intended) and visual condition inspection of the following components:

  • Windows, entrance door, cargo access doors, and external sidewalls

  • Emergency breakaway switch and mounted DOT lights

  • Slide outs - including roof, seals, sweeps, and gaskets

  • Awning - frames and latching mechanisms

  • Power cord and converter

  • Generator (if applicable)

  • Inverter (if applicable)

  • Battery (Batteries), fuse panel, and 12v DC fuses

  • Fresh water tank and connections

  • Gray and black tanks

  • Life Safety Systems (GFCI, smoke detectors, LP and CO detector, fire extinguisher, emergency exit window(s), and hot skin test on exterior sidewalls)

  • Refrigerator, if the refrigerator has been operating for a minimum of 12 hours.

  • Water heater

  • Furnace

  • Air Conditioner(s)

  • Cooktop

  • Microwave

  • Fireplace (if applicable)

  • Cooktop exhaust and ceiling mounted fans

  • Interior lighting

  • TV, stereo system, DVD/disk player

  • Shower - showerhead, framework, seals, door, and latch

  • Cabinet doors, drawers, and pull-outs

  • Multifunctional furniture (tri-fold sofas, dinette to bed, reclining massage chairs, etc.)

  • Leveling systems

Essential level also includes visual condition inspection of these components:

  • Propane system - hoses, tanks, cylinders

  • Hitch system

  • Weight labels and data plates

  • Roof and roof-mounted components

  • Running gear - tires, including age and weight capabilities

  • Inner walls, doors, and flooring

  • All furniture

  • Dishwasher (if applicable)

  • Washer/Dryer (if applicable)

  • In-house vacuum system (if applicable)

Premium Level Inspection

With our premium inspection, the inspector will cover 600 points on the RV. The report will include the results of the inspector’s evaluations on the 600 points, as well as 80 - 100 photos to support those findings. This inspection takes from 8 - 10 hours, depending on the size and complexity of the RV, and the report is typically finished within 36 hours of the inspector finishing his inspection of the RV.

The premium inspection includes the following, in addition to what is included in the essential level inspection:

  • Identify the Roof material type and the sealants applied to the roof.

  • Evaluate the condition of the various sealant and joints around the roofing components.

  • Identify areas of concern and potential water intrusion points.

  • Inspect and identify the material type of the front and rear caps.

  • Evaluate the aging and general overall condition of the front and rear caps.

  • Inspect and evaluate any damage, discoloration, and delamination of the side wall and end cap components.

  • Identify the types of slideout room drive systems.

  • Identify the type of roof material for the slideout room.

  • Evaluate the attached wiring and utility harness that feed underneath the slideout room.

  • Inspect and identify the operational type (manual or electric) of the awnings, slideout toppers, and window awnings.

  • Evaluate and rate the condition of the fabric material of the awnings.

  • Inspect the condition of the 7-pin connector cord.

  • Identify any damage or repair of the power cord.

  • List any heat discoloration to the wiring and connections.

  • Verify the separation of all the wiring types.

  • Start, operate and test the onboard generator under load.

  • Test the voltage output and frequency (60 cycles) of the generator.

  • Place an electrical load on the inverter to verify proper operation.

  • Test the voltage and frequency output of the inverter under fifty percent load.

  • Evaluate and determine if positive and negative cables for the coach battery system are matched for a balanced load.

  • Evaluate the operation of the fresh water and waste water monitor panel for incorrect tank readings.

  • Verify the fresh water connections for the City Water hookup are operational.

  • Operationally test all fresh water fixtures inside and outside of the RV.

  • Visually inspect the water filtration system (if installed) for leaks and filter placement.

  • Identify the type of drain valve controls.

  • Verify the drain valves for both systems will maintain water in their tanks.

  • Verify plastic cover has been installed over the regulator.

  • On the Split tank system, verify the red-colored single-stage regulator is installed.

  • Document the manufacture dates of DOT cylinders (if installed).

  • List the location(s) of the DOT cylinders.

  • List the tank sizes that have been installed.

  • List the location of the ASME tank (if installed).

  • Document the manufacture date of the ASME tank if accessible.

  • List the gallon capacity of the tank.

  • Visually verify if the baffle system on the back of the refrigerator area is correct and directing heat away from gas coils.

  • Check the condition of the door frame, shelving, crisper drawers, door shelves, and interior light.

  • Evaluate and rate the freezer and refrigerator door gasket seals.

  • Visually inspect water heater burner assembly and gas exhaust system for blockages and insect infestation.

  • If installed and visible, verify the positioning of bypass valves on the back of the water heater.

  • Determine if a proper drain plug is installed in the water heater tank.

  • If installed, inspect and evaluate if the correct type of dauber screen is used.

  • If accessible, identify the brand, model, and type of furnace(s)that have been installed.

  • Identify the type of thermostat controls used to operate the furnace(s).

  • Visually inspect air intake and exhaust assemblies for blockages and insect infestation.

  • Operate and verify warm air discharge out of vents and proper return airflow to the unit.

  • Monitor for unusual noise or vibration of the blower motor.

  • If installed, inspect and evaluate if the correct type of dauber screen is used.

  • List the presence and condition of the stove top covers.

  • Verify the ignition and operation of all top burners and the oven flame (if equipped).

  • Inspect and rate the condition of the metal grill top and rubber grommets of the cooktop burner area.

  • Evaluate the presence of the units control knobs, door handles, and oven racks.

  • Identify and list the type of cooling unit/heat pump.

  • Inspect the air filter(s) debris and cleanliness.

  • Visually inspect the washing machine for leaks or damaged hoses.

  • Evaluate and rate the exterior condition of the dryer exhaust vent.

  • Identify and list the brand, model, type, and output wattage of the unit.

  • Verify the rack and turn tables are installed.

  • Operate the unit for 60 seconds utilizing a cup of water and then list the water temperature.

  • Identify and list the brand, model, and type of dishwasher.

  • Verify the operation of the dishwasher and inspect for leaks.

  • Verify the operation and visually inspect the components of the in house vacuum hose assembly, access doors, and dirt bag.

  • Identify and list the brand, model, and type of the fireplace (if applicable).

  • Operate and verify the various heat settings, fan speed levels, and backlighting of the fireplace.

  • Evaluate and rate the exterior condition of the cooktop exhaust vent.

  • Verify lighting on ceiling fans (if equipped).

  • Evaluate the window coverings.

  • Operate all interior, exterior, and decor lighting, 12-volts and 120-volts.

  • Visually inspect all countertops and flat surface areas of the kitchen, living room, bathroom, bedroom, and storage areas for scratches and damage.

  • Identify and list all broken and loose cabinet and closet hardware.

  • Note if the appearance of previous damage repairs has been performed.

  • Verify local channels, antenna, and 12-volt DC power signal booster are operational.

  • Raise, and lower roof mounted antenna if equipped.

  • Verify remotes are functional (if present).

  • Visually inspect the glass panels, curtains, and soap dish areas in the shower(s).

  • Inspect and evaluate the stains and chemical/mineral buildup in the shower(s).

  • Type and number of axles.

  • Inspect the frame, axles, springs, rims, and other components for rust, oil stains, and visible damage.

  • Check tire pressure.

  • Inspect and rate tire tread condition.

  • Note any valve extensions and pressure monitors.

  • Inspect and identify the type of system used to tow the vehicle.

  • Evaluate and list modifications to the hitch system.

Please note: Due to safety concerns the inspector is not allowed to move the RV, be it a trailer or motorhome. Everything inspected will depend on the arrangements made between you, the customer, and the seller of the RV in question. If you would like the electrical, water or sewer systems tested, the RV will need to be connected to those sources. Adverse weather conditions, such as lightning, heavy rain, snow or wind, can cause certain points on the RV to be not inspectable. Rest assured, however, that our inspector will attempt to inspect everything and will call you if there is something that is impeding the inspection from being completed.

Contact us

Interested in an inspection? Fill out some info, and we will be in touch shortly. We can’t wait to hear from you!